-
May 24 , 2021
How to choose grinding wheels for better using your slitter blades
Slitter blades will rub with boards during operation, resulting in blade blunding. Therefore, it is neccessary to shapen blades with grinding wheels. Slitter blades made of different materials should be sharpened with correspondinggrinding wheels. For example, you can choose CBN(cubic boron nitride) grinding wheel for high-speed steel thin blade, with particle size ranging from 100#-150#; While tu...
View More
-
Feb 22 , 2022
High quality slitting blades
Roller shearing machine blade is made of high-quality wear-resistant material. Slitting blades are high precision and wear resistance, oil resistance, heat resistance, acid and alkali resistance after forging, heat treatment and grinding. It can be used for a long time without deformation, so it could ensure the accuracy of slitting size. In particular, it has obvious effect on slitting sensi...
View More
-
Jun 09 , 2022
Common Shear Blade Materials
Cold-rolled and hot-rolled sheet steel are the common materials used to manufacture shear blades. For hot-rolled plate The disadvantage of hot-rolled plate is that some sulfides, oxides, silicates, etc. inside the hot-rolled steel will be extruded and thinned, resulting in non fusion and delamination. This will reduce the tensile force of the steel, and may cause interlayer cracking when the weldi...
View More
-
Aug 25 , 2022
Material of Tpylex
Tpylex is a kind of material which mainly used for metal slitter knife, steel plate shearing machine knife, and guillotine shear knife. The component of Tpylex are: C: 0.47, Mn: 0.5, Si: 0.60, Cr: 1.50, Mo: 0.75, V: 0.15, Ni: 4.30
View More